You can download a PDF partial DIY manual here for your own peace of mind.
Installation is also available in most areas. Call for details.

CONSTRUCTION IS NOT COMPLICATED

LEVEL GROUND IS IMPORTANT

If the posts are plumb and at 4 foot centers, everything else goes smooth.

FRONT AND BACK WALL FRAMING

Installing the door of your choice is the hardest part. The back wall is solid with insulation and a cut-out for the evaporative cooling pads.

WIRE LOCK AND POLY INSTALLED

As soon as the poly is in place the inflation blower is turned on creating an air filled "bubble". Kind of like a bounce house.

FINISHING TOUCHES & YOU ARE
READY TO GROW

HYdroponics, Aquaponics, Bucket Systems, Conventional, and more.
They all work great!!!

LUMBER LIST FOR DIY

For end walls and base boards

24’ Greenhouse : (4) 2x8x8 and (2) 2x8x12’
36’ Greenhouse : (4) 2x8x8’ and (4) 2x8x12’

The same for both size greenhouses-

16 – 2x4x8’

6 – 2x4x12’

3 – 1x2x6’ - (8’ if 6’ not available)

2 – 4x4x12’ (must be straight)

5 – sheets of 7/16” 4’x8’ OSB or treated plywood

5 – sheets of 1x4’x8’ foil one side insulboard if this is your insulation.

The door should be 36" wide

We use a good screen door with sliding glass on the bottom panel ($99 Lowes)

©2019 by Complete Greenhouse. Proudly created with Wix.com